WikiPrint - from Polar Technologies

Contributing for users

To make it easier and more accessible for anyone to play around with the DRM4G, we have decided to host our source code on GitHub.

If you want to contribute to this repository please be aware that this project follows a certain gitflow.

So please fork this repository and create a local branch in which to do your work, and then create a pull requests to the main DRM4G repository.

Necessary Steps

For those of you who wish to help but don't know how, the first thing you need is a ?GitHub account.

In our project's page hit the "Fork" button at the top right corner:

This will create a copy of our repository in your account where you'll develop your own feature or implement a bugfix that you may believe is necessary. You'll be submitting changes to this one until you are certain everything works properly, at which point you can request to have your changes integrated into the DRM4G's repository.

To continue, you'll need to setup a local repository where you'll be changing the code and doing your testing. To do this you'll need your repository URL, that can be obtained adding .git to your project page or by clicking on the "Clone or download" button:

In Linux operating systems:

git init  #to initialize an empty Git repository
git remote add origin <your_repository_url> #to make your local repository point to your remote repository in GitHub
git fetch
git checkout develop #to create a local copy of the develop branch

To be consistent with our gitflow, all you'll be able to do is create feature or bugfix branches, and you'll have to follow our naming conventions to do so.

With this, you will now have DRM4G's source code at your disposal.

From here you could create branches for every new feature you'd like to include to the DRM4G, for a more in depth tutorial on how to do that, click ?here.

Testing the DRM4G

Once you've made the changes you wanted to, you'll want to install your version to be sure that your new feature is working properly.

Just in case you would like to try out different versions, we recommend you use a virtual environment to test it.

Before you can install and try out your own version, you'll have to build your own package:

This will create a a distribution package under a folder called dist.

Installing your version in a virtual environment

Go to wherever you have your virtual environment, open a terminal and execute the following commands:

source bin/activate
export DRM4G_DIR = $PWD/conf 
pip install path/to/drm4g/package

DRM4G_DIR is where the configuration files will be installed. More information here.

And that's it. Now you can use and test your own version of DRM4G.

For other ways to install the DRM4G, you can check here.

How to debug code

You have at your disposal a number of ways to check what could have gone wrong when something breaks.

Via the DRM4G CLI

Via the logger

Via the job's logs

Commiting changes

After you've tested that everything is in working order, it's time to update your GitHub fork.

git add .
git commit -m "Description of the changes you've made"
git push origin develop

From here you'll have to create a Pull request.

Creating a Pull Request

As time passes, chances are that the main DRM4G repository has had other contributors merge changes into it, so you should first update your local repository and check that there are no conflicts.

git checkout develop
git remote add github #just do run this command the first time to add the main repository to the list of your remotes
git pull github develop

If there have been any changes, but there are no conflicts, you can just push your changes into your remote repository.

git push origin develop

In the case that there are conflicts, resolve them and commit the changes, after do the push to update your remote repository.

After, you just have to go to your repositories web page and click on the "New pull request" button.

A message will tell you if there are any conflicts that need to be solved or if an automatic merge is possible. Then you just have to click on the "Create pull request", give this merge a title (which will serve as the commit message if the pull request is accepted), a comment if you want (can be useful to explain in more detail why this should be integrated into the DRM4G), and click a second time on the "Create pull request" button.

Now you'll have to wait and see if the administrator of the project accepts the changes you're proposing.

Another option would be to create a new branch from the "develop" branch and then try to make a pull request from that.

git checkout develop
git checkout -b new_branch
#make some changes
git add .
git commit -m "Description of the changes you've made"
git push origin new_branch

The next time you enter your repository's web page, you'll see a new button:

Click on "Compare & pull request" to perform a pull request on to the main repository. The same will happen as when clicking on "New pull request" when on a previously existing branch.

Contributing for developers

The aim of this section will be to explain the process we follow to contribute to the development of the DRM4G.

We use something similar to a ?gitflow workflow. Internally we synchronize our work with GitBucket, which is what will be considered as the central repository of the Santander Meteorology Group.

Necessary steps

There are a lot of tutorials showing how to use git, including our own, but this is more straightforward explanation on how to get started.

In Linux operating systems:

git init  #to initialize an empty Git repository
git remote add origin #to make your local repository point to the remote repository in GitBucket
git fetch
git checkout master #to create a local repository of the master branch
git checkout develop #to create a local repository of the develop branch

If you want to see the changes your doing, check the file ".git/config" under your repository directory.

With this, you will now have DRM4G's source code at your disposal.

From here you should follow our gitflow and create branches for every new feature you'd like to include to the DRM4G.

Our Git workflow

In this section you'll find the guidelines of how we tackle the development process.

As mentioned above, to us, our central repository will be a private one hosted by GitBucket, but in addition we have a second public one hosted in GitHub to make the DRM4G accessible to anyone that might want to contribute to the project.

To add the GitHub repository as a new remote:

git remote add github

Both this two repositories have at least two branches, the master and the develop branches, that must be synchronized at all times.

If during development, you find yourself working in a team and wish to share your code, push your work to our central repository in GitBucket, not GitHub.

git push -u origin <branch_name>

Something to remember then, is that when you've finished your work on the branch, you mustn't forget to eliminate it from the remote repository.

git branch -d <branch_name> #deletes the branch from your local repository
git push origin :<branch_name> #deletes the same branch from the remote repository

Another reminder, is that before pushing your work onto the remote repositories, you should always check that no changes have been made in them.

git remote -v update #updates your remote refs and shows the state of the branches
git status -uno #informs you whether your current branch is ahead, behind or has diverged from the remote

In the case that changes exist in the remote repository, you should perform a pull, resolve any possible conflicts, and then make the push.

git pull origin <branch_name>
#do necessary operations
git push origin <branch_name>

Adding new features

Each time some big change or new feature is going to be implemented, a new feature branch has to be created from the develop branch.

The feature branches are how new functionalities are introduced and tested. Normally the finalization of one of them will also define when a new release will be published, but that's not always the case since a new release may include more than one new feature.

git checkout develop
git checkout -b new_feature #it will switch you to the new branch

When finished, the branch has to be merged back into the develop branch. After it can be deleted.

git checkout develop
git merge --no-ff new_feature
git branch -d new_feature
git push origin develop
git push github develop

To make the log more readable, in the cases in which a lot of small commits were made in the feature branch, it may be advisable to rebase to merge some commits before doing the merge into develop:

git rebase -i <hash_code>

Updating a branch

Sometimes you'll want to incorporate the changes or improvements made in one branch into another one. To avoid making the log history too complicated when merging the feature branch back into the develop branch, the merges will be fast forwarded.

git checkout branch_a
git merge branch_b

Getting ready for a release

Once all the new changes for the next release have been added to the develop branch and it is at a stable point, it's time to publish a new release.

From this point on, all the following changes done on the develop branch will be for the following release. So, to avoid halting the development of the project a new release branch is created indicating the new release number.

It is in this branch where the version number of all the files will be modified, and where the code will be brought to a release ready state. That means that it is where minor bug fixes will be made, where comments and unnecessary code snippets will be removed and other maintenance tasks will be carried out.

When ready, all that needs to be done is merge it into the master, create a tag, update the remote repositories and publish the new release.

git checkout master
git merge --squash drm4g-X.X.X
git commit -v
git tag X.X.X
git push origin master --tags
git push github master --tags

Updating the develop will be a bit different. If it is ever needed to rollback to a previous version, its commit has to be accessible. So merges to the develop branch won't be squashed.

git checkout develop
git merge --no-ff drm4g-X.X.X
git push origin develop
git push github develop

Aferwards you can just delete the release branch.

git branch -d drm4g-X.X.X

Problems merging branches

When performing a merge, there may be some complications.

git checkout master
git merge --squash drm4g-X.X.X
#conflict occurred
git merge --abort #or in case you commited without realizing it "git reset --hard HEAD~1" to go back to the previous commit
#"git reset --hard HEAD" if the "--abort" commands gives you this message "fatal: There is no merge to abort (MERGE_HEAD missing)."
git merge --squash -Xtheirs drm4g-X.X.X
git commit -v


As an exception to the normal flow of the development, in the cases when an important error is discovered only after the release has been published, a hotfix branch can be created from the master to fix it.

After the problem was solved, you'd have to follow the instructions to prepare for a new release, except considering the hotfix branch to be the release branch.

If it turns out to be a critical error and not something fixable in a few hours, the release would have to be retracted until the issue got resolved.

Publishing a release

After having updated the master, it's time to publish the release.

  1. First, the package has to be uploaded to PyPI, there's a few ways to do this, but you'll need to have an account with access to the groups ?PyPI page.
  2. Run the command python register or modify your ?$HOME/.pypirc file and add your credentials to be able to submit package data to PyPI.
  3. Finally submit the distribution files.

At the end, the last step is to update the realese wiki page and the references in the section "New releases" of the DRM4G's main wiki page.

Managing the GitHub account

For the administrator of the DRM4G's GitHub repository:

When you see that there's a new pull request, either because you saw it on the projects page or because you received a message in your mail informing you about it, you can click on the "Pull requests" button.

SVN repository migration to Git

This section exists in case there's a need to convert any other project from Subversion to Git, including tags, the same way that has been done for the DRM4G and WRF4G. There may be better ways of doing it, but this is the only one that we've tested.

The program used is called ?svn2git. Follow the link to see how to install it.

Once installed, you can try to use the options they have listed in ?usage.

mkdir <local_repository_folder>
cd <local_repository_folder>
svn2git --username <user_name>
git checkout <project_branch>
rm -rf WRF* #if you need to clean up
#if they were empty you won't need to make a commit
#rename the project branch
git branch -m master old-master
git branch -m <project_branch> master
git remote add origin<project_name>.git
git push -u origin master
git tag
git tag -d <tag-names>
git push origin --tags
git branch
git branch -D <every_branch>